Cum să alegi spinningul pentru știucă

The most common method of catching pike in both flowing and still water is spinning. For this, a wide variety of baits are used, which differ not only in appearance. Depending on the season, baits of different weights are used, for casting which it will not be possible to use the same blank, therefore, for beginners, this often causes a problem. The choice of spinning for pike is carried out only after consultation with a specialist, otherwise you can buy a not entirely successful option.

The subtleties of choosing a spinning rod

Choosing a pike spinning rod is not as easy as it seems at first glance, fishing stores now offer a very large selection and variety of models. They will differ according to several characteristics, but the main one is to highlight the seasonality of fishing and the bait used for this.

The following table will help you choose the right spinning for catching a predator:

It should be understood that the choice of spinning for pike in the winter is possible if there are non-freezing reservoirs. For fishing from ice, fishing rods are used much shorter and softer.

Caracteristici principale

Everyone puts their own into the concept of good spinning rods, it is important for someone to cast a larger bait, and someone prefers to fish with delicate baits. The main characteristics of an explanatory form are different, they must be found out and remembered by both a novice and a more experienced angler.

Plug or telescope

It is easy to determine the best spinning for pike and other predators according to these indicators; anglers with experience recommend using plug options. It is the blank of two parts that will be able to perfectly feel the movement of the bait, and therefore in time to carry out the notch of the trophy.

Plugs are convenient in terms of transportation, they can be transported in small cases or tubes, but when fishing, they will work out the bite worse.

Material cu antet

The strength and lightness of the selected form depends on the material. In stores, the angler will be offered several options for spinning blanks:

• fiberglass belongs to the lower class blanks, a cheap spinning rod will have a decent weight, will not be able to cast light lures and will not clearly beat off the bite. However, it will be almost impossible to “kill” him, he is very strong and, when serifed, can withstand even a large predator without any problems.
• Composite pike spinning is lighter than fiberglass, but still, when working with a blank all day long, you will feel tired in the evening. It works out bites better, the bait allows you to carry it out more successfully, and in terms of strength it keeps the middle peasant.
• The best blank for pike today is carbon. It is this material that is almost not felt in the hand, and with a properly selected reel, even after a day of active spinning, fatigue will be minimal. They produce such forms with both plugs and telescopes, it is the first option that is better suited.

Carbon fiber rods can also differ from each other, it’s all about the quality of carbon fiber. Usually this indicator is written on the form itself, the larger the number, the better.

Length and action

Under the predator, or rather the wiring of various baits to catch him, they choose blanks from the fast (fast) or extrafast (very fast) series. For a beginner, these terms will not say anything, an experienced angler knows something about this. These names denote the spinning action, that is, an indicator of How long the tip will bend when biting.

With extrafast, the whip of the blank will bend by ¼, and with fast by 2/4. This means that the bite can be noticed almost immediately.

You should not miscalculate with the length, this parameter is chosen based on the size of the reservoir and the place of fishing:

• fishing from the coastline will require the use of longer rods, and if the reservoir is also large, then it is better not to use a blank less than 2,7 m at all;
• fishing from a boat takes place with shorter spinning rods, because on it you can get as close as possible to the chosen place, so a length of up to 2 m will be quite enough even for a large reservoir.

It should be understood that there is no universal length, even with a size of 2,4 m, which is considered the golden mean, it will not work equally well from a boat and from the shore.

Rezultatele testului

This characteristic directly depends on the baits used in the first place, and the season will make its own adjustments:

• in the spring they catch mainly on small baits, therefore, the spinning test for pike can reach a maximum of 15 g;
• summer will require heavier baits, which means that the form must be selected with more test indicators, during this period the maximum should be at least 20 g;
• in the fall, pike baits need heavy ones, spinning blanks should perfectly cast jigs and 40 g in weight, which is why they choose from options with test values ​​up to 40-50 g.

If fishing of an unfrozen reservoir is carried out in winter with bottom baits of a decent weight, then the rod is chosen with the appropriate indicators, up to 80 g is enough.

Inele

When choosing a form, you should pay special attention to the rings. It is better to give preference to such models, where:

• rings on a high foot;
• large ring closest to the handle;
• inserts are integral, without cracks;
• titanium bets in rings would be a good option, but ceramics also have excellent reviews.

On an ultralight, the ring closest to the handle can be small.

Handle and reel seat

For convenience, the handle for the spinning blank is made of two materials:

• natural crust is used in classic models, it is practical, but it will add weight to the rod;
• modern EVA will be lighter, but wet hands can sometimes slip on it.

Here it is impossible to definitely advise something specific, each angler chooses the most suitable option for himself.

The serviceability of the reel seat is checked immediately upon purchase, it is better to give preference to models with a metal version, but in most budget ones there is a fairly strong plastic. The fixing nut can be located both above and below, this will not have any effect on the work of the form.

Now we know how to choose spinning for pike, all important characteristics are described. But that’s not all, the concept of the best spinning also depends on the method of fishing.

Selection by type of fishing

Depending on what type of fishing is planned, the form itself is selected. Each type will require its own characteristics that will allow the form to work best.

Spinners, wobblers, jerks

Which spinning rod is better for such baits? Conventionally, these baits are divided into heavy and light, depending on this, and choose a form:

• for light baits, a rod of 1,8 -2,4 m is suitable, depending on where the fishing will be carried out, but the test indicators should be up to 15 g;
• heavier oscillators and wobblers will require a test from the selected form from 10 g, but the maximum can be 60 g.

Otherwise, the characteristics of the rod are selected according to the individual preferences of the angler.

gigă

Trophy pike are often caught on a jig, this type of equipment works mainly at considerable depths and often in strong currents. This was the reason for choosing forms with a significant test:

• 14-56 g is suitable for light jigging;
• 28-84 g is used for application on large water bodies with current.

trolling

Trolling sticks must withstand significant loads, so the indicators on the rods often reach up to 200 g. The minimum for this type of fishing should be at least 30 g, with such indicators, even with a small wobbler, the bite will be clearly visible.

The length of the rod is chosen small, 1,65-2 m will be enough.

Otherwise, each angler selects a form for spinning independently. The main thing is that the rod “lay” in the hand, the spinning player should feel it as an extension of the hand, then all the subtleties of this type of fishing will be comprehended faster and easier.