Cuprins
The main purpose of the hood is to clean the air from odors, carcinogens, combustion products. Grease on kitchen furniture and utensils, yellowed wallpaper and dirty ceilings are the inevitable result of not using the hood.
The company Elikor has more than 50 models in its catalog, and the manufacturer himself claims that every fourth hood sold in Our Country is made by him. The design of most hoods is “traditional”, however, this does not mean “retro”, rather it is a traditional reading of all modern styles.
All Elikor hoods are produced on modern German-made equipment, motors are purchased in Italy, the production itself is located in Our Country. The company manufactures products not only for the domestic market, but also for export.
The Titan hood is one of the most popular models, and for good reason: it is one of the most successful hoods in terms of price and functionality, and it is also important that its design fits perfectly into most modern kitchens.
Which kitchen is Elikor Titan suitable for?
The Elikor Titan wall-mounted inclined hood is suitable for almost any kitchen in an apartment or a private house. The dimensions of the hood are such that it can easily fit even in the smallest kitchen. The company recommends the use of hoods in kitchens up to 16 square meters. m. For spacious kitchens in private homes or kitchen-living rooms, if necessary, it is possible to use several hoods.
If we talk about design, then Elikor Titan is quite consistent with fashion trends in interior design: minimalism, hi-tech, loft. The unit looks stylish and, no doubt, decorates the interior.
The main advantages of Elikor Titan
The design implements a progressive system of perimeter air suction. This means that the flow rate increases, its temperature decreases, which contributes to the concentration of fat droplets, and they actively settle on the inlet filter. Thus, much less dirt reaches the engine, which facilitates its operation and increases its service life.
The grease filter made of anodized aluminum is not located horizontally, but at an angle, and is covered with a mirror panel. Air enters it through narrow slots around the perimeter of the device. Moreover, the motor runs at low speed, which significantly reduces the noise level.
High build quality, an Italian-made motor, a German powder coating line, and a five-year branded warranty on the hood make the device very attractive. It is possible to carry out warranty repairs and post-warranty service in the Elikor branded service network. The kitchen will give you pleasure for a long time with its appearance and fresh atmosphere in your home.
Hood Elikor Titan in the interior of the kitchen
Characteristics of Elikor Titan
Dimensiuni și design
The hood fits perfectly into the design of almost any kitchen and collects polluted air over an electric or gas hob.
The width of 60 cm is quite standard for this type of equipment, and the depth of 29.5 cm is less than many other hoods on the market. This means that the hood can fit into almost any interior, even in the smallest kitchen.
White color is traditional for kitchen appliances. Black is loved by modern designers, stainless steel looks great in high-tech interiors.
- Width 0,6 m;
- Depth 0.295 m;
- Height with false pipe 0,726 m;
- The device is available in three design options: white, black and stainless steel with black accents.
Puterea și performanța
The manufacturing company claims that the performance of the hood is optimal for a room of 16 square meters. m. Three speeds allow you to quite fine-tune the operating mode of the device, but it is worth remembering that at maximum speed the motor wears out faster, makes more noise and consumes more energy, and at the minimum, the air exchange rate in the room decreases.
- Power 147 W;
- Productivity 430 cubic meters / hour;
- Three hood speeds
Moduri de funcționare
The hood operates in two modes:
- Extraction mode with the removal of polluted air outside the premises;
- Recirculation mode, with the return of purified air back to the kitchen.
The mode with the removal of polluted air is preferable, but it requires the ability to connect to exhaust ventilation or an additional channel for ejecting air into the surrounding atmosphere. Tapping into the exhaust ventilation duct in parallel with a water heater or heating boiler is prohibited, as well as connection to the inlet ventilation duct. If these possibilities are excluded, then it is necessary to use a scheme with recirculation.
Accesorii necesare
To operate the device in the exhaust mode with the removal of air from the room, you must additionally purchase a corrugated semi-rigid air duct with a diameter of 150 mm, a Flat 42P-430-KZD mortise block and a ventilation grill in the kitchen design style.
In the recirculation mode, it is mandatory to use an F-00 carbon filter. It is made of highly absorbent activated carbon and captures all the odors that fill the air during cooking.
The absorbing properties of the filter are maintained for 160 hours, which corresponds to three to four months of regularly turning on the hood. But if smells in the kitchen appear before this time, then the filter needs to be replaced immediately.
Elikor Titan price in Our Country
The hood belongs to the democratic price segment and is distinguished by modern methods of air purification. The price of the device in online stores starts from 6000 rubles for a white or black case and from 6990 rubles for a stainless steel version with black elements.
Where to buy Elikor Titan
The Elikor Titan hood (and other Elikor hoods) is in the assortment of most large online stores in Our Country. Also, at any time, you can order the hood on the official website of the manufacturer. Delivery works throughout Our Country.
Recenzii ale clientilor
Customer reviews are taken from the Yandex.Market website, the author’s spelling is preserved.
Elikor Titan installation instructions
Cerințe de siguranță
All work on maintenance and repair of the hood is carried out only when the power is turned off and the power plug is removed from the socket. The electric stove must be turned off, the burners of the gas stove must be extinguished.
Noțiuni de bază
Before installing the hood, open the front glass panel of the hood by pulling on its lower edge. Then remove the aluminum grease filter by depressing its spring latch. The plate should be securely covered from the dust that is inevitable when drilling holes in the wall, it would even be better to put a hard coating on it.
For installation, you need a puncher, dowels, screwdrivers or a screwdriver. It is necessary to lay the power cable to the location of the hood in the strobe or cable duct.
Procedura de instalare
1. The hood must be suspended above the center of the stove so that its lower edge is at a height of 0,65 m above the electric stove or 0,75 m above the gas stove with an open fire.
2. Marking holes for mounting is made according to the template, the description of which is given in the instruction manual for the device.
3. Dowels 4×10 mm are inserted into 50 holes, where 2 self-tapping screws 6×50 mm are screwed.
4. The hood is hung on them with keyhole holes, then two more 6×50 mm screws are screwed into the remaining two dowels and the hood is finally fixed to the wall.
5. Replace the filter and close the front panel.
6. The corrugated air duct leading to the ventilation duct is covered with a false pipe. For its installation, it is necessary to install an additional bracket above the hood. Its width is adjustable for a specific model, holes for dowels are marked in accordance with the instructions. The bracket is mounted on self-tapping screws, after connecting the air duct, a false pipe is fixed on it.
7. The hood is connected to a 220 V network with a frequency of 50 Hz. A Euro socket with a grounding contact and a circuit breaker with a tripping current of 2 A are required.
Rules for the operation and maintenance of Elikor Titan
- The hood is turned on, if necessary, at the beginning of the cooking process of any dishes. In order to boil the kettle, the first, weakest mode of operation is enough. If it is supposed to fry fish or steaks, then the most powerful mode is needed.
- Contaminated surfaces of the hood are cleaned with a soft cloth moistened with dishwashing liquid. Special compounds are used to clean the stainless steel case.
- The aluminum grease filter is cleaned once a month. To do this, it is removed from the hood, and then washed by hand with a neutral detergent or in a dishwasher at a temperature of +60 degrees. It is prohibited to bend it. The charcoal filter is disposable and must be replaced every 4 months or when unwanted odors appear in the kitchen.